Filling Liquid Applicator & Powder Dish

Using the Needle Applicator

Liquid:
Squeeze bulb on pipette, put tip into liquid and release pipette bulb to draw liquid.
Move pipette to uncapped applicator bottle and squeeze pipette bulb to transfer the liquid

Powder:
Remove tip of powder bottle, gently squeeze powder from bottle into dish

---

Applying Plastex Using the Applicator Needle:

- Place the needle onto the tip of the liquid applicator bottle.
- Position above powder dish, gently squeeze liquid bottle and place one or two drops into powder
- Quickly pickup sphere with the tip of the needle and position over repair area
- Gently squeeze liquid bottle to flow the materials onto repair area, repeat as needed to complete repair

- Tip: Can't pickup mixture ball? - Fill powder dish. ·
- Tip: Too much liquid comes out? - Fill liquid bottle to avoid this

---

Using Plastex to Repair Cracks and Fill Gaps

Remove dirt and oil from repair area.
File or grind a V groove along cracked area

Apply Plastex mixture onto repair area as needed
Allow Plastex to cure and finish as needed
Use cellophane tape to keep mixture from seeping through crack.

Tip: If mix sets too soon, add more liquid